Specific to Bitwig Studio
- Each selected track is exported to its own file in one go.
- If you choose several formats, each track is saved once per format: choose WAV only.
- Remove the Master limiter before exporting.
Mix and master your Bitwig Studio stems with AI
From Bitwig Studio’s File › Export Audio to an AI mix and master. Export your Bitwig Studio tracks, upload them to MixingMusic.AI and get an AI mix and master in your browser, with nothing to install. MixingMusic.AI does not replace your DAW: it finishes the song you started in it.
From Bitwig Studio to your master in 4 steps
- Step 1
Open File › Export Audio… and, in the “Tracks” section, tick each track you want exported separately; group tracks show up as folders you can unfold.
Where to export: File › Export Audio - Step 2
Choose 24-bit WAV. Turn on “Pre-fader” if you want to ignore the mixer’s volume automation in the stems.
- Step 3
Upload the files to MixingMusic.AI (up to 12 stems as WAV, MP3, FLAC, AAC or M4A). The AI proposes a mix by style and by each track’s instrument.
- Step 4
Fine-tune with per-track EQ, the MixBus with LUFS and VU, and AudioChat; then master with AI and compare the original and the master at matched loudness.
Exporting from Bitwig Studio
True for any DAW
- Export every stem from the same start point (the project’s 0:00) and with the same length: that keeps them aligned.
- 24-bit WAV is ideal. MixingMusic.AI also accepts MP3, FLAC, AAC and M4A.
- Remove limiters and maximizers from the Master: mastering happens afterwards, in MixingMusic.AI.
- No clipping and with headroom: no stem should reach 0 dBFS.
- The limit is 12 stems: group tracks (drums, backing vocals, layers) if you have more.
What MixingMusic.AI does with your stems
AI mixing
The AI mixes by style and by each track’s instrument; you decide every change.
Learn more →Per-track EQ and MixBus
EQ over the live spectrum, a stereo VU meter and an LUFS meter.
Learn more →AudioChat
An AI chat that analyzes and adjusts a track or the MixBus with your approval.
Learn more →AI mastering
Hear your mix, compare original and master at matched loudness and download 24-bit WAV.
Learn more →Frequently asked questions about Bitwig Studio and MixingMusic.AI
How do I export Bitwig Studio stems to mix them with AI?
Open File › Export Audio… and, in the “Tracks” section, tick each track you want exported separately; group tracks show up as folders you can unfold. Choose 24-bit WAV. Turn on “Pre-fader” if you want to ignore the mixer’s volume automation in the stems. Then upload the files to MixingMusic.AI, where the AI mixes them and you can master the result.
What does “Pre-fader” do when exporting stems from Bitwig Studio?
It ignores the mixer volume and its automation, so the stems come out at each track’s original level. It is useful if you want to decide the levels later, in the MixingMusic.AI mix.
Do I need Bitwig Studio to use MixingMusic.AI?
No. MixingMusic.AI runs in the browser and takes audio files. Bitwig Studio is for producing and recording; MixingMusic.AI is for mixing and mastering with AI what you exported.
How many Bitwig Studio stems can I upload?
Up to 12 stems per project, as WAV, MP3, FLAC, AAC or M4A. If you have more tracks, group them in your DAW (drums, backing vocals, layers) and export the groups.
Can I master without uploading stems?
Yes. You can upload the final stereo mix and use AI Mastering, or “Improve mix”. To mix track by track with AI you need the stems.
Is it free to try?
Yes: your first mix, one master and one AI try are free. After that there are one-time plans, no subscription.
Official sources
Bitwig Studio help pages consulted. Menu names can change with your version.
Bitwig Studio is a trademark of Bitwig. MixingMusic.AI is not affiliated with Bitwig and Bitwig does not endorse this page.
Your next Bitwig Studio song, mixed and mastered with AI.
Export your stems and hear the difference today.